Skip to main content
Tagasi

EVS-EN ISO 16276-2:2025

Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 2: Cross-cut testing and X-cut testing (ISO 16276-2:2025)

Üldinfo

Kehtiv alates 02.06.2025
Alusdokumendid
ISO 16276-2:2025; EN ISO 16276-2:2025
Tegevusala (ICS grupid)
87.040 Värvid ja lakid
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
02.06.2025
Põhitekst
04.07.2007
Põhitekst
This document specifies procedures for assessing the resistance of paint systems when a cut in the form of a right-angle lattice pattern (cross-cut) or in the form of an X (X-cut) is made into the paint, penetrating through to the substrate. This document is only applicable if the cross-cut or X-cut test method is specified, together with the rating from the appropriate rating scale.
This document also specifies suitable equipment and defines inspection areas, sampling plans and acceptance/rejection criteria.
It does not specify ratings for particular coating systems.

Nõutud väljad on tähistatud *

*
*
*
PDF
16,12 € koos KM-ga
Paber
16,12 € koos KM-ga
Sirvi standardit alates 2,48 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN ISO 16276-1:2025

Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 1: Pull-off testing (ISO 16276-1:2025)
Uusim versioon Kehtiv alates 01.07.2025
Põhitekst

EVS-EN ISO 4628-8:2012

Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect (ISO 4628-8:2012)
Uusim versioon Kehtiv alates 05.12.2012
Põhitekst

EVS-EN ISO 4628-1:2016

Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system (ISO 4628-1:2016)
Uusim versioon Kehtiv alates 02.03.2016
Põhitekst

EVS-EN ISO 4628-2:2016

Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016)
Uusim versioon Kehtiv alates 02.03.2016