Skip to main content
Tagasi

EVS-EN ISO 18563-1:2022

Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 1: Instruments (ISO 18563-1:2022)

Üldinfo

Kehtiv alates 17.10.2022
Alusdokumendid
ISO 18563-1:2022; EN ISO 18563-1:2022
Tegevusala (ICS grupid)
19.100 Mittepurustav katsetamine
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
17.10.2022
Põhitekst
02.07.2015
Põhitekst
This document specifies the functional characteristics of multi-channel ultrasonic phased array instruments used for array probes and provides methods for their measurement and verification.
This document is also applicable to ultrasonic phased array instruments in automated systems; but other tests can be needed to ensure satisfactory performance. When the phased array instrument is a part of an automated system, the acceptance criteria can be modified by agreement between the parties involved.
This document also can partly be applicable to FMC instruments and TFM instruments.
This document gives the extent of the verification and defines acceptance criteria within a frequency range of 0,5 MHz to 10 MHz.

Nõutud väljad on tähistatud *

*
*
*
PDF
32,24 € koos KM-ga
Paber
32,24 € koos KM-ga
Sirvi standardit alates 2,48 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN ISO 17636-2:2022

Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors (ISO 17636-2:2022, Corrected version 2023-02)
Uusim versioon Kehtiv alates 17.10.2022
Põhitekst

EVS-EN ISO 5817:2023

Keevitamine. Terase, nikli, titaani ja nende sulamite sulakeevisliited (välja arvatud kiirguskeevituse meetodid). Kvaliteeditasemed keevitusdefektidele
Uusim versioon Kehtiv alates 03.04.2023
Põhitekst

EVS-EN ISO 18563-3:2024

Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 3: Complete systems (ISO 18563-3:2024)
Uusim versioon Kehtiv alates 15.05.2024
Põhitekst

EVS-EN ISO 19675:2024

Non-destructive testing - Ultrasonic testing - Specification for a calibration block for phased array testing (PAUT) (ISO 19675:2017)
Uusim versioon Kehtiv alates 01.08.2024